Cyclone Separators on Board at Australia’s Leading Mechanical Pump Seals Suppliers
CYCLONIC SEPARATION is a method of removing particulates from an air, gas or liquid stream, without the use of filters, through vortex separation.
When removing particulate matter from liquids, a hydrocyclone is used; while from gas, a gas cyclone is used.
Rotational effects and gravity are used to separate mixtures of solids and fluids. The method can also be used to separate fine droplets of liquid from a gaseous stream.
A high speed rotating (air) flow is established within a cylindrical or conical container called a cyclone. Air flows in a helical pattern, beginning at the top (wide end) of the cyclone and ending at the bottom (narrow) end before exiting the cyclone in a straight stream through the center of the cyclone and out the top.
Larger (denser) particles in the rotating stream have too much inertia to follow the tight curve of the stream, and strike the outside wall, then fall to the bottom of the cyclone where they can be removed.
In a conical system, as the rotating flow moves towards the narrow end of the cyclone, the rotational radius of the stream is reduced, thus separating smaller and smaller particles.
The cyclone geometry, together with volumetric flow rate, defines the cut point of the cyclone. This is the size of particle that will be removed from the stream with a 50% efficiency.
Particles larger than the cut point will be removed with a greater efficiency, and smaller particles with a lower efficiency.
Mechanical Seals for:
- Centrifugal Pumps
- Slurry Pumps
- Submersible Pumps
- Mixers & Agitators